Full body harness
It is a very important device for working at heights. If working at heights without wearing a safety belt, it is very dangerous for workers at heights, unless there is another protection system to support, such as a guardrail or a fall protection fence, etc.
The safety belt has the function of supporting the worker wearing the equipment by connecting to the lifeline or Lanyard which is connected to the anchoring point on the building or various structures to prevent falling from heights. This full-body safety belt is designed to support the body and has at least 1 connection point for the connector to the Lanyard or D-Ring. The anchoring point is located at the back of the suit (when wearing the safety belt, the anchoring point will be at the back of the wearer’s head). In addition to the D-Ring at the back of the head that comes with the standard safety belt, some safety belts are designed with special D-Rings at various points of the safety belt to suit each job, such as at the chest, both waists. In addition, there are safety belt sets made of special materials for specific jobs, such as safety belt sets made of non-conductive materials for work at heights involving electricity or suits with spark protection for welding at heights. |
|
Full body harness
HT-331QR Full body harness with 5 anchor points for fall protection and rescue and work positioning applications. Full body harness with 9 adjustable steel buckles and 1 oval steel ring, 1 aluminum climber and 1 carabiner. EVA waist belt with shoulder and leg support for comfort when working at height.
HT-315 Safety belt made from Polyester is a device to prevent falling from heights. There is a D-Ring at the back for 1 attachment point for fastening the hook and 2 hooks at the front. It can be adjusted to 5 points. It is suitable for work that must be done at heights, construction work, work on scaffolding or various risky work that may cause falling.
HT-318 The safety belt is made from Polyester and is a device to prevent falling from heights. There is 1 D-Ring on the back for attaching to a hook and 2 D-Rings on the front. The chest area is used for attaching to a hook. It can be adjusted to 5 points. It is suitable for work that must be done at heights, construction work, work on scaffolding or other risky work that may cause a fall.
HT-321 Full body safety harness with 2 fall attachment points: 1 back steel D-ring, 2 chest textile rings, 2 side aluminum D-rings for working position according to EN358. Full body safety harness with 6 steel adjustable buckles; Super comfortable EVA material waist liner, all liners are made of air vent technology, improve the comfort of hanging.
Lanyard, Fall arrester
HT-507Y Made from polyester, durable and flexible, withstands tensile forces of 32Kn. The ends of the rope are covered with a plastic sheath to prevent the rope from loosening. There is a plastic U-shaped ring at the head and tail to increase the strength of the double rope, size 11mm. Length 1.8m. With 2 large hooks
HT-511YL Made from polyester, flexible, high tensile strength 32Kn, double rope is a flat rope, size 30mm., length 1.8m. with 2 large hooks, suitable for working at heights that must change direction, with a fall protection line for attachment, can be assembled with a fall protection suit, with Absorber to absorb the shock to help reduce the danger level.
HT-509YL The buffer bag is made of polyester webbing with a width of 44 mm and tear flat tape; Made of high tenacity 11mm static rope to shorten the natural length of the safety rope and prevent entanglement during climbing; Equipped with 1 aluminum alloy automatic lock carabiner; With 60mm gate open aluminum alloy hook; The outer material of the buffer bag is made of strong wear-resistant PE material, visual management, easy to safely check the use of energy absorber.
HT-612 Aluminum rope grab self-locking regulator for progressive movement; Made of 12mm high wear-resistant static rope;With 1 screwlock carabiner; With 1 17 mm gate open steel snap hook; The rope is equipped with a wear-resistant sheath, which can protect the rope from abrasion and avoid damage from sharp edges.
HT-W02YL This fall protection device is durable, lightweight Effectively prevents falls and is convenient
Easy to use In the event of a fall, the automatic speed detection system will start working, stopping the fall Length 1.8 meters, double webbing type, size 20 mm. With 2 large aluminum hooks The frame material is made of lightweight, tough, strong polymer Carabiner
For welding SRL Made of Steel When a fall occurs, the device will automatically lock the rope (with Shock Absorber) Can withstand a maximum weight of 100 kg.
HT-W06E Length 6 m. Webbing type 20 mm. Tensile strength 15 kN. Dinema fibers are not easily tangled, resistant to wear and tear.With 1 small 22 mm Steel Hook. SRL storage box made of lightweight, tough, strong polymer. SRL welding carabiner made of steel with a screw lock system. When a fall occurs, the device will automatically lock the rope (with Shock Absorber).
Can be used at a vertical angle of no more than 40 degrees. Can withstand a maximum weight of 140 kg.
Rescue Tripod With Winch
