Fire Fighting Suit Inside Building
DINO FIRE Indoor Firefighting Suit NFPA,EN Standard
Available in yellow, orange, navy blue
Including
1. Shirt and pants, TECATE ADVANCE fabric, lightweight 6.5 osy (220gsm)
NFPA 1791:2018
2. Full-face fire helmet, FTK model, fire-resistant material, with heat-resistant visor
EN443:2008
3. Flame and heat-resistant head covering made of Nomex40% Kevlar60% fabric, 16″ long
NFPA 2112
4. Firefighting gloves, HYSAFETY 7992 model
5. RJX rubber boots, electrical protection 5000V EN 15090:2005
 |  |  |  |
Fire Fighting Suit Outside The Building
 |  |  |
Firefighter’s knee-length vest, hook and eye, yellow, orange | Firefighter’s vest and orange firefighter’s pants | Firefighting suit with orange, navy, red jumpsuit |
 |  |  |
Black fiberglass helmet, durable, strong | Leather gloves with inner lining and sewn edges on the cuffs | Steel-soled, steel-toe boots |
Fire Fighting Suit Inside Building
Nomex SHIELD 4000
– Front collar with Velcro tab
– Radio pocket mounted on chest with microphone mount on left and Glove hook for hanging gloves or equipment on right
– Reflective strips on arms, legs and torso
– 3M Scotchlite Perforated Tape
Nomex SHIELD 2000
For covering the head, used in firefighting, rescue and industrial plants. The fabric can prevent fire, is not flammable and is heat-resistant. It is breathable and can be used with firefighting suits, breathing apparatus and firefighting helmets.
MSA Rescue and fire helmet
MSA CAIRNS INVADER 664
It is a composite fire helmet designed to fit the wearer’s head size to fit the SCBA mask perfectly. The fire helmet protects the head from impact and heat. The back strap can be adjusted in 3 levels to fit and comfort the wearer. Available in 4 colors: black, yellow, red and white.
MSA GALLET F2XR
It is a strong rescue helmet with a beautiful design, suitable for firefighters and rescuers. The exterior has a distinctive shape. The interior can be easily adjusted in size and also supports firefighting and rescue accessories such as glasses, flashlights, face shields, neck masks, waterproof earmuffs, and noise reduction.
SICOR VFR-EVO
Round fire helmet with a ridge on the top, full head type (Full Protection) made of fire-resistant and heat-resistant material THERMOPLASTIC. With a reflective visor and adjustable glasses up and down. Can install a flashlight on the side of the head. 4-point chin strap, adjustable. Available in 8 colors: white, yellow, reflective yellow, orange, reflective orange, red, black, blue.
SICOR EOM
This helmet is mainly suitable for rescue work. The helmet structure is made of hard plastic (THERMOPLASTIC) with 10 ventilation holes. It comes with a protective net and a FREE SIZE visor that can be adjusted to fit the head. It is available in 4 colors: white, red, yellow, and lime green. It is certified according to European standards.
9300/GA
Made of full-grain cowhide, waterproof, black, 3-layer coated lining, Crosstech seam-sealed,
3M reflective strips in yellow, aluminum toe cap with 200 joules impact resistance, heat-resistant zipper, sole made of
Nitrile rubber, heat-resistant to 300 degrees, reinforced with a composite puncture-resistant sheet tested to 1,100 newtons, height 23.5 cm.
Made in Italy
